-- Network Working Group G. Malkin
-- Request for Comments: 1724 Xylogics, Inc.
-- Obsoletes: 1389 F. Baker
-- Category: Standards Track Cisco Systems
-- November 1994
--
--
-- RIP Version 2 MIB Extension
--RIPv2-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Counter32,
TimeTicks,IpAddressFROM SNMPv2-SMI
TEXTUAL-CONVENTION,RowStatusFROM SNMPv2-TC
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF
mib-2 FROM RFC1213-MIB;-- This MIB module uses the extended OBJECT-TYPE macro as-- defined in [9].rip2 MODULE-IDENTITYLAST-UPDATED"9407272253Z"-- Wed Jul 27 22:53:04 PDT 1994ORGANIZATION"IETF RIP-II Working Group"CONTACT-INFO" Fred Baker
Postal: Cisco Systems
519 Lado Drive
Santa Barbara, California 93111
Tel: +1 805 681 0115
E-Mail: fbaker@cisco.com
Postal: Gary Malkin
Xylogics, Inc.
53 Third Avenue
Burlington, MA 01803
Phone: (617) 272-8140
EMail: gmalkin@Xylogics.COM"DESCRIPTION"The MIB module to describe the RIP2 Version 2 Protocol"::={ mib-2 23}-- RIP-2 Management Information Base-- the RouteTag type represents the contents of the-- Route Domain field in the packet header or route entry.-- The use of the Route Domain is deprecated.RouteTag::=TEXTUAL-CONVENTION
STATUScurrentDESCRIPTION"the RouteTag type represents the contents of the Route Domain
field in the packet header or route entry"SYNTAXOCTETSTRING(SIZE(2))--4.1 Global Counters-- The RIP-2 Globals Group.
-- Implementation of this group is mandatory for systems
-- which implement RIP-2.-- These counters are intended to facilitate debugging quickly
-- changing routes or failing neighborsrip2Globals OBJECTIDENTIFIER::={ rip2 1}rip2GlobalRouteChanges OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of route changes made to the IP Route
Database by RIP. This does not include the refresh
of a route's age."::={ rip2Globals 1}rip2GlobalQueries OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of responses sent to RIP queries
from other systems."::={ rip2Globals 2}
--4.2 RIP Interface Tables-- RIP Interfaces Groups
-- Implementation of these Groups is mandatory for systems
-- which implement RIP-2.-- The RIP Interface Status Table.rip2IfStatTable OBJECT-TYPESYNTAXSEQUENCEOF Rip2IfStatEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A list of subnets which require separate
status monitoring in RIP."::={ rip2 2}rip2IfStatEntry OBJECT-TYPESYNTAX Rip2IfStatEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A Single Routing Domain in a single Subnet."INDEX{ rip2IfStatAddress }::={ rip2IfStatTable 1}
Rip2IfStatEntry ::=SEQUENCE{
rip2IfStatAddress
IpAddress,
rip2IfStatRcvBadPackets
Counter32,
rip2IfStatRcvBadRoutes
Counter32,
rip2IfStatSentUpdates
Counter32,
rip2IfStatStatus
RowStatus
}rip2IfStatAddress OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The IP Address of this system on the indicated
subnet. For unnumbered interfaces, the value 0.0.0.N,
where the least significant 24 bits (N) is the ifIndex
for the IP Interface in network byte order."::={ rip2IfStatEntry 1}rip2IfStatRcvBadPackets OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of RIP response packets received by
the RIP process which were subsequently discarded
for any reason (e.g. a version 0 packet, or an
unknown command type)."::={ rip2IfStatEntry 2}rip2IfStatRcvBadRoutes OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of routes, in valid RIP packets,
which were ignored for any reason (e.g. unknown
address family, or invalid metric)."::={ rip2IfStatEntry 3}rip2IfStatSentUpdates OBJECT-TYPE
SYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of triggered RIP updates actually
sent on this interface. This explicitly does
NOT include full updates sent containing new
information."::={ rip2IfStatEntry 4}rip2IfStatStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"Writing invalid has the effect of deleting
this interface."::={ rip2IfStatEntry 5}-- The RIP Interface Configuration Table.rip2IfConfTable OBJECT-TYPESYNTAXSEQUENCEOF Rip2IfConfEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A list of subnets which require separate
configuration in RIP."::={ rip2 3}rip2IfConfEntry OBJECT-TYPESYNTAX Rip2IfConfEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"A Single Routing Domain in a single Subnet."INDEX{ rip2IfConfAddress }::={ rip2IfConfTable 1}
Rip2IfConfEntry ::=SEQUENCE{
rip2IfConfAddress
IpAddress,
rip2IfConfDomain
RouteTag,
rip2IfConfAuthType
INTEGER,
rip2IfConfAuthKey
OCTETSTRING(SIZE(0..16)),
rip2IfConfSend
INTEGER,
rip2IfConfReceive
INTEGER,
rip2IfConfDefaultMetric
INTEGER,
rip2IfConfStatus
RowStatus,
rip2IfConfSrcAddress
IpAddress}rip2IfConfAddress OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The IP Address of this system on the indicated
subnet. For unnumbered interfaces, the value 0.0.0.N,
where the least significant 24 bits (N) is the ifIndex
for the IP Interface in network byte order."
::={ rip2IfConfEntry 1}rip2IfConfDomain OBJECT-TYPESYNTAXRouteTagMAX-ACCESSread-createSTATUSobsoleteDESCRIPTION"Value inserted into the Routing Domain field
of all RIP packets sent on this interface."DEFVAL{ '0000'h }::={ rip2IfConfEntry 2}rip2IfConfAuthType OBJECT-TYPESYNTAXINTEGER{noAuthentication (1),simplePassword (2),md5 (3)}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The type of Authentication used on this
interface."DEFVAL{ noAuthentication }::={ rip2IfConfEntry 3}rip2IfConfAuthKey OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0..16))
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The value to be used as the Authentication Key
whenever the corresponding instance of
rip2IfConfAuthType has a value other than
noAuthentication. A modification of the corresponding
instance of rip2IfConfAuthType does not modify
the rip2IfConfAuthKey value. If a string shorter
than 16 octets is supplied, it will be left-
justified and padded to 16 octets, on the right,
with nulls (0x00).
Reading this object always results in an OCTET
STRING of length zero; authentication may not
be bypassed by reading the MIB object."DEFVAL{ ''h }::={ rip2IfConfEntry 4}rip2IfConfSend OBJECT-TYPESYNTAXINTEGER{doNotSend (1),ripVersion1 (2),rip1Compatible (3),ripVersion2 (4),ripV1Demand (5),ripV2Demand (6)}MAX-ACCESSread-create
STATUScurrentDESCRIPTION"What the router sends on this interface.
ripVersion1 implies sending RIP updates compliant
with RFC 1058. rip1Compatible implies
broadcasting RIP-2 updates using RFC 1058 route
subsumption rules. ripVersion2 implies
multicasting RIP-2 updates. ripV1Demand indicates
the use of Demand RIP on a WAN interface under RIP
Version 1 rules. ripV2Demand indicates the use of
Demand RIP on a WAN interface under Version 2 rules."DEFVAL{ rip1Compatible }::={ rip2IfConfEntry 5}rip2IfConfReceive OBJECT-TYPESYNTAXINTEGER{rip1 (1),rip2 (2),rip1OrRip2 (3),doNotRecieve (4)}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"This indicates which version of RIP updates
are to be accepted. Note that rip2 and
rip1OrRip2 implies reception of multicast
packets."DEFVAL{ rip1OrRip2 }::={ rip2IfConfEntry 6}
rip2IfConfDefaultMetric OBJECT-TYPESYNTAXINTEGER(0..15)MAX-ACCESSread-createSTATUScurrentDESCRIPTION"This variable indicates the metric that is to
be used for the default route entry in RIP updates
originated on this interface. A value of zero
indicates that no default route should be
originated; in this case, a default route via
another router may be propagated."::={ rip2IfConfEntry 7}rip2IfConfStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"Writing invalid has the effect of deleting
this interface."::={ rip2IfConfEntry 8}rip2IfConfSrcAddress OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The IP Address this system will use as a source
address on this interface. If it is a numbered
interface, this MUST be the same value as
rip2IfConfAddress. On unnumbered interfaces,
it must be the value of rip2IfConfAddress for
some interface on the system."::={ rip2IfConfEntry 9}--4.3 Peer Table-- Peer Table-- The RIP Peer Group
-- Implementation of this Group is Optional-- This group provides information about active peer
-- relationships intended to assist in debugging. An
-- active peer is a router from which a valid RIP
-- updated has been heard in the last 180 seconds.rip2PeerTable OBJECT-TYPESYNTAXSEQUENCEOF Rip2PeerEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A list of RIP Peers."::={ rip2 4}rip2PeerEntry OBJECT-TYPESYNTAX Rip2PeerEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Information regarding a single routing peer."INDEX{ rip2PeerAddress, rip2PeerDomain }::={ rip2PeerTable 1}
Rip2PeerEntry ::=SEQUENCE{
rip2PeerAddress
IpAddress,
rip2PeerDomain
RouteTag,
rip2PeerLastUpdate
TimeTicks,
rip2PeerVersion
INTEGER,
rip2PeerRcvBadPackets
Counter32,
rip2PeerRcvBadRoutes
Counter32}rip2PeerAddress OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The IP Address that the peer is using as its source
address. Note that on an unnumbered link, this may
not be a member of any subnet on the system."::={ rip2PeerEntry 1}rip2PeerDomain OBJECT-TYPESYNTAXRouteTagMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The value in the Routing Domain field in RIP
packets received from the peer. As domain suuport
is deprecated, this must be zero."::={ rip2PeerEntry 2}rip2PeerLastUpdate OBJECT-TYPESYNTAXTimeTicksMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The value of sysUpTime when the most recent
RIP update was received from this system."::={ rip2PeerEntry 3}rip2PeerVersion OBJECT-TYPESYNTAXINTEGER(0..255)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The RIP version number in the header of the
last RIP packet received."::={ rip2PeerEntry 4}rip2PeerRcvBadPackets OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of RIP response packets from this
peer discarded as invalid."::={ rip2PeerEntry 5}rip2PeerRcvBadRoutes OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of routes from this peer that were
ignored because the entry format was invalid."::={ rip2PeerEntry 6}-- conformance information
rip2Conformance OBJECTIDENTIFIER::={ rip2 5}rip2Groups OBJECTIDENTIFIER::={ rip2Conformance 1}rip2Compliances OBJECTIDENTIFIER::={ rip2Conformance 2}-- compliance statementsrip2Compliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement "MODULE-- this moduleMANDATORY-GROUPS{
rip2GlobalGroup,
rip2IfStatGroup,
rip2IfConfGroup,
rip2PeerGroup
}GROUP rip2GlobalGroup
DESCRIPTION"This group defines global controls for RIP-II systems."GROUP rip2IfStatGroup
DESCRIPTION"This group defines interface statistics for RIP-II systems."GROUP rip2IfConfGroup
DESCRIPTION"This group defines interface configuration for RIP-II systems."GROUP rip2PeerGroup
DESCRIPTION"This group defines peer information for RIP-II systems."::={ rip2Compliances 1}
-- units of conformancerip2GlobalGroup OBJECT-GROUPOBJECTS{
rip2GlobalRouteChanges,
rip2GlobalQueries
}STATUScurrentDESCRIPTION"This group defines global controls for RIP-II systems."::={ rip2Groups 1}rip2IfStatGroup OBJECT-GROUPOBJECTS{
rip2IfStatAddress,
rip2IfStatRcvBadPackets,
rip2IfStatRcvBadRoutes,
rip2IfStatSentUpdates,
rip2IfStatStatus
}STATUScurrentDESCRIPTION"This group defines interface statistics for RIP-II systems."::={ rip2Groups 2}rip2IfConfGroup OBJECT-GROUPOBJECTS{
rip2IfConfAddress,
rip2IfConfAuthType,
rip2IfConfAuthKey,
rip2IfConfSend,
rip2IfConfReceive,
rip2IfConfDefaultMetric,
rip2IfConfStatus,
rip2IfConfSrcAddress
}STATUScurrentDESCRIPTION"This group defines interface configuration for RIP-II systems."::={ rip2Groups 3}
rip2PeerGroup OBJECT-GROUPOBJECTS{
rip2PeerAddress,
rip2PeerDomain,
rip2PeerLastUpdate,
rip2PeerVersion,
rip2PeerRcvBadPackets,
rip2PeerRcvBadRoutes
}STATUScurrentDESCRIPTION"This group defines peer information for RIP-II systems."::={ rip2Groups 4}END